Page 16 of 21 Scout mini - Manual Rev.1.0
Table 5. Keyboard command summary
Command Short cut Description
Go to selected
port
<Ctrl> <Ctrl> x
where ‘x’ is A or B
Connects your common keyboard, monitor, mouse
and speakers to the selected computer.
Go to next port <Ctrl> +
Selects the other computer.
Go to previous
port
<Ctrl> -
Selects the other computer.
Scan On <Ctrl> S
Turns Scan mode on, causing Scout mini to start
scanning sequentially from one port to the other.
Scan Off <Ctrl> X
Turns Scan mode off.
Note: Scan can also be stopped by entering a port
selection command.
Reset
command
<Ctrl> R
Resets and enables mouse and keyboard, enables
PS/2 mouse on currently selected port.
Send null to
mouse
<Ctrl> N
Used to re-synchronize PS/2 mouse which has
gone out-of-sync.
Reset computer
mouse
<Ctrl> O (alpha not
zero)
Used to reset computers mouse
Identify ROM
version
<Ctrl> I
Identifies ROM version, The computer must be at
some sort of command prompt to receive value.
Keep Setting <Ctrl> K
Tells Scout mini to save current scan state and
custom setting of commands shown below.
Scan time
interval
<Ctrl> T xx <Enter>
where ‘xx’ is time in
seconds from 1-15
seconds
Set the time, in seconds, that Scout mini will pause
at each port when scanning.
Note: Follow with Keep command.
Set keyboard
mode
Select port, then enter
command: <Ctrl> M x
<Enter> where ‘x’ is 1, 2
or 3
Sets the Scout mini’s keyboard mode. Used when
computer is booted before being connected to Scout
mini.
Note: Follow with Keep command.
Set typematic
value
<Ctrl> A xxx <Enter>
where ‘xxx’ is a 1-3 digit
number from 0 to 127
indicating KB typematic
value
Sets power-on keyboard typematic action, which is
controlled by the Scout mini. This can be used to
adjust the keystroke rate and delay to the user
preferred setting. See tables 1 and 4 for how
typematic value is determined.
Note: Follow with Keep command
Set mouse
type: Mixture
of PS/2 and
Serial type
Select port, then enter
command: <Ctrl> Q x
<Enter> where ‘x’ is 0 for
a regular PS/2 mouse, 1
for a serial mouse or 2
for a PS/2 wheel mouse
Sets the Scout mini mouse ports to either serial or
PS/2 and PS/2 wheel mouse types. A PS/2 style
mouse must be used to allow for a mixture of mice.
Note: Follow with Keep command.
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels