Dakota Computer Solutions Vista Spécifications télécharger pdf (Page 8)

Page 8 of 21 Scout mini - Manual Rev.1.0

Front panel

The Scout mini front panel features five LEDs and two switches. To familiarize yourself with the Scout

mini’s controls and indicators, review the illustration on the left side and the descriptions given below.

Table 1. Front panel

Reset switch

Resets the unit and initializes the keyboard and mouse, also used

to reset the unit to factory default settings

Status LED

The yellow status LED lights as data is received from the

keyboard and mouse. It is off when the keyboard and mouse are

idle

Select LEDs 1-2

The red LEDs indicate which computer is currently selected and

connected to the keyboard, monitor, mouse and speakers

Power LEDs 1-2

The green LEDs show if the computers are powered on

Select switch

Selects the computer to connect to the keyboard, monitor, mouse

and speakers

Connectors

All cables are connected at the Scout mini’s side and rear panels. The side panels are used to

connect the computers with the combo CPU cables. The rear panel is used to connect the keyboard,

monitor, mouse and speakers. For these you do not need an adapter cable, since these should plug in

directly.

Table 2. Connectors

Panel Label Connector Description

A,B

HD15 / Mini-Din-6 / Mini-Din-6 /

3.5 mm stereo jack

Computers are connected at these

ports using CPU adaptor cables. You

must use one adaptor cable for each

computer you plan to connect.

VGA monitor

HD15 female Connect the VGA monitor directly to this

connector.

PS/2 mouse

Mini-Din-6 female Connect the PS/2 mouse directly to this

connector.

PS/2 keyboard

Mini-Din-6 female Connect the keyboard directly to this

connector.

PC Speakers

3.5mm mini audio jack female Connect your powered PC speakers to

this connector.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 20 21

Commentaires sur ces manuels

Pas de commentaire

Dakota Computer Solutions Vista Spécifications Page 8

Commentaires sur ces manuels