Page 9 of 21 Scout mini - Manual Rev.1.0
INSTALLATION
Step 1. Connecting monitor, keyboard, mouse and speakers
1.1 Plug monitor, keyboard, mouse and speaker cables directly into the rear panel of the unit.
Step 2. Connecting the computers
CPU cables connect your computers to the Scout mini. Each computer requires its own cable set.
2.1 Plug the HD15 male connector of the cable set into the VGA connector of your computer. Plug
the green PS/2 male connector of the cable set into the PS/2 mouse connector of your
computer. Plug the violet PS/2 male connector of the cable set into the PS/2 keyboard
connector of your computer. Plug the 3.5mm stereo connector into the stereo jack of your
computer.
2.2 Plug the HD15 male connector of the cable set into the VGA connector 1(2) of the Scout mini.
Plug the green PS/2 male connector of the cable set into the PS/2 mouse connector 1(2) of
the Scout mini. Plug the violet PS/2 male connector of the cable set into the PS/2 keyboard
connector 1(2) of the Scout mini. Plug a 3.5mm stereo connector (not included) into the stereo
jack 1(2) of the Scout mini.
2.3 Verbinden Sie Ihren zweiten Rechner wie unter 2.1 und 2.2 beschrieben mit dem Scout mini.
WARNING :
Use only the delivered cable sets from Dakota Computer Solutions to connect your computers to the
Scout mini, as they are specially designed for the requirements of the Scout mini. The use of other
cables can severely damage the Scout mini! Avoid routing cable near fluorescent lights, air
conditioning compressors, or machines that may create electrical noise.
Step 3. Powering up the system
3.1 Boot up each of the connected computers. Scout mini emulates all keyboard and mouse
functions for automatic boot-up. You do not have to re-boot the computer, if it is inconvenient.
In this case you may need to issue the mode command, see page 11, to have proper
keyboard communication.
Step 4. Switching from the keyboard
Your Scout mini is now ready for operation using its default settings. Pressing the numbered switch on
the front panel will switch to that computer. To take full advantage of the Scout mini’s features refer to
the chapter Operation. The chapter Operation gives detailed information about each of the Scout mini
commands, describing its application and giving the keyboard command sequence. For your
convenience, this information is summarized in the Keyboard command summary. To begin switching
immediately from the keyboard follow the instructions below.
4.1 Press your keyboard’s left Control key (<CTRL>) twice, release it, then type in the computer
number A or B.
Switching to computer A: < CTRL >< CTRL ><A>
Switching to computer B: < CTRL >< CTRL ><B>
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels